VMware NSX: Install, Configure, Manage [V6.2] - Lab Connect
| Summary: |
  
Lab
(30 Days)
Overview:
This is a cloud-based lab environment which includes all of the labs from the VMware NSX: Install, Configure, Manage [V6.2] course. This self-paced environment is available for 30 days or 30 hours of active time, whichever expires first. The environment consists of 22 labs detailed below.
• Lab 1: Configuring NSX Manager • Lab 2: Configuring and Deploying a VMware NSX Controller Cluster • Lab 3: Creating and Configuring a Distributed Switch • Lab 4: Preparing for Virtual Networking • Lab 5: Configuring Logical Switch Networks • Lab 6: Configuring and Deploying an NSX Distributed Router • Lab 7: Deploying an NSX Edge Services Gateway and Configuring Static Routing • Lab 8: Configuring and Testing Dynamic Routing on NSX Edge Appliances • Lab 9: Configuring Equal Cost Multipathing • Lab 10: Configuring L2 Bridging • Lab 11: Configuring and Testing Network Address Translation on an NSX Edge Services Gateway • Lab 12: Configuring Load Balancing with NSX Edge Gateway • Lab 13: Configuring Advanced Load Balancing • Lab 14: Configuring NSX Edge High Availability • Lab 15: Configuring Layer 2 VPN Tunnels • Lab 16: Configuring IPsec Tunnels • Lab 17: Configuring and Testing SSL VPN-Plus • Lab 18: Using NSX Edge Firewall Rules to Control Network Traffic • Lab 19: Using the VMware NSX Distributed Firewall Rules to Control Network Traffic • Lab 20: Using VMware NSX Service Composer • Lab 21: Using VMware NSX Service Composer • Lab 22: Configuring the Cross-vCenter NSX Feature |
|
